Generation amount prediction and material flow analysis of electronic waste: a case study in Beijing, China.

The draft legislation on e-waste prepared by the Chinese national government assigns management responsibility to local governments. It is an urgent task for the municipal government to plan an effective system as soon as possible to divert the e-waste flow from the existing informal e-waste recycling processes. This paper presents a case study implemented in Beijing, the capital city of China, with the purpose of predicting the amount of obsolete equipment for five main kinds of electronic appliances from urban households and to analyse the flow after the end of their useful phase. The amount to be handled was 885,354 units in 2005 and is predicted to double by 2010. Due to consumption growth and the expansion of urbanization it is estimated that the amount will increase to approximate 2,820,000 units by 2020: 70% of the obsolete appliances will be awaiting collection for possible recycling, 7% will be stored at the owner's home for 1 year on average and 4% will be discarded directly and enter the municipal solid waste collecting system. The remaining items will be reused for about 3 years on average after the change of ownership. The results of this study will assist the waste management authorities of Beijing to plan the collecting system and facilities needed for management of e-waste generated in the near future.     

Virus inactivation during coagulation with aluminum coagulants

We used the bacteriophages Qβ and MS2 to determine whether viruses are inactivated by aluminum coagulants during the coagulation process. We performed batch coagulation and filtration experiments with virus-containing solutions. After filtering the supernatant of the coagulated solution through a membrane with a pore size of 50 nm, we measured the virus concentration by both the plaque forming unit (PFU) and polymerase chain reaction (PCR) methods. The virus concentration determined by the PFU method, which determines the infectious virus concentration, was always lower than that determined by the PCR-based method, which determines total virus concentration, regardless of infectivity. This discrepancy can be explained by the formation of aggregates consisting of several virus particles or by the inactivation of viruses in the coagulation process. The former possibility can be discounted because (i) aggregates of several virus particles would not pass through the 50-nm pores of the filtration membrane, and (ii) our particle size measurements revealed that the virus particles in the membrane filtrate were monodispersed. These observations clearly showed that non-infectious Qβ particles were present in the membrane filtrate after the coagulation process with aluminum coagulants. We subsequently revealed that the viruses lost their infectivity after being mixed with hydrolyzing aluminum species during the coagulation process.     

Preliminary investigation of greenhouse gas emissions from the environmental sector in Taiwan

The United Nations Framework Conventions on Climate Change (UNFCCC) asks their Parties to submit a National Inventory Report (NIR) for greenhouse gas (GHG) emissions on an annual basis. However, when many countries are quickly growing their economy, resulting in substantial GHG emissions, their inventory reporting systems either have not been established or been able to be linked to planning of mitigation measures at national administration levels. The present research was aimed to quantify the GHG emissions from an environmental sector in Taiwan and also to establish a linkage between the developed inventories and development of mitigation plans. The "environmental sector" consists of public service under jurisdiction of the Taiwan Environmental Protection Administration: landfilling, composting, waste transportation, wastewater treatment, night soil treatment, and solid waste incineration. The preliminary results were compared with that of the United States, Germany, Japan, United Kingdom, and Korea, considering the gaps in the scopes of the sectors. The GHG emissions from the Taiwanese environmental sector were mostly estimated by following the default methodology in the Intergovernmental Panel on Climate Change guideline, except that of night soil treatment and waste transportation that were modified or newly developed. The GHG emissions from the environmental sectors in 2004 were 10,225 kilotons of CO2 equivalent (kt CO2 Eq.). Landfilling (48.86%), solid waste incineration (27%), and wastewater treatment (21.5%) were the major contributors. Methane was the most significant GHG (70.6%), followed by carbon dioxide (27.8%) and nitrous oxide (1.6%). In summary, the GHG emissions estimated for the environmental sector in Taiwan provided reasonable preliminary results that were consistent and comparable with the existing authorized data. On the basis of the inventory results and the comparisons with the other countries, recommendations of mitigation plans were made, including wastewater and solid waste recycling, methane recovery for energy, and waste reduction/sorting.     

Behavior of PCDD/Fs during open burning of municipal solid waste in open dumping sites

Open dumping sites in Surabaya and Palembang, Indonesia, have been studied to investigate emissions of polychlorinated dibenzo-para-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs), as well as the resulting soil contamination that might be caused by open burning of municipal solid waste. The emission factors of the waste residue, accounting for the ratio of waste burned, have also been characterized. The concentrations of PCDD/Fs and DL-PCBs in soil from Palembang were 61–310 pg-TEQ/g (dry weight) and 6.3–32 pg-TEQ/g, respectively. In Surabaya, very low levels of PCDD/Fs and DL-PCBs, ranging from 0.075 to 0.098 and 0.00032 to 0.095 pg-TEQ/g, respectively, were observed in soil for an open dumping site that included a top cover layer of soil above the compacted waste. The large difference in concentrations can be explained by the fact that open burning of waste is the source of PCDD/Fs and DL-PCBs. The emission factors for the residue for PCDD/Fs ranged from 27 to 140 pg-TEQ/g, and a sensitivity analysis found that the maximum emission factor to the residue could be 5600 pg-TEQ/g. Our results indicate that emissions of PCDD/Fs can be controlled by modifying the open dumping process to one that involves depositing soil layers on top of the compacted waste.     

Study of Asian Dust Phenomena in 2001–2003 Using A Network of Continuously Operated Polarization Lidars

We have conducted dust observations at a number of locations including Beijing, Hefei, Suwon, Fukue, Nagasaki, Tsukuba, and Sapporo using automated two-wavelength polarization lidars o study Asian dust phenomena, including generation, transport, and change during transport. We developed a method using the depolarization ratio for estimating the contributions of Asian dust and spherical air-pollution aerosols in observed aerosol mixtures. We analyzed the dust profiles statistically to derive climatological characteristics and year-on-year variations. We also studied dust source and transport path for each dust event using the regional chemical transport model CFORS. The statistical analysis clearly demonstrated the year-on-year variation of dust phenomena and the characteristics depending on the locations of the observational sites. Most major dust events in 2001 and 2002 originated in Inner Mongolia and/or Mongolia at the southern edge of a low-pressure area located in Siberia and were transported by strong westerlies. In 2003, the typical meteorological pattern for heavy dust cases accompanying a strong low in Siberia was not seen, except for one case in April. Furthermore, the lidar observation in Beijing suggests that less dust was generated in the source regions in Inner Mongolia and/or Mongolia, probably due to higher precipitation in 2003.     

An evaluation of alternative household solid waste treatment practices using life cycle inventory assessment mode

Waste disposal is an important part of the life cycle of a product and is associated with environmental burdens like any other life-cycle stages. In this study, an integrated assessment for solid waste treatment practices, especially household solid waste, was undertaken to evaluate the impact contribution of household solid waste treatment alternatives towards the sustainable development by using Life Cycle Inventory Assessment method. A case study has been investigated under various possible scenarios, such as (1) landfill without landfill gas recovery, (2) landfill with landfill gas recovery and flaring, (3) landfill with landfill gas recovery and electric generation, (4) composting, and (5) incineration. The evaluation utilized the Life Cycle Inventory Assessment method for multiple assessments based on various aspects, such as greenhouse gas emission/reduction, energy generation/consumption, economic benefit, investment and operating cost, and land use burden. The results showed that incineration was the most efficient alternative for greenhouse gas emission reduction, economic benefit, energy recovery, and land use reduction, although it was identified as the most expensive for investment and operating cost, while composting scenario was also an efficient alternative with quite economic benefit, low investment and operating cost, and high reduction of land use, although it was identified as existing greenhouse gas emission and no energy generation. Furthermore, the aim of this study was also to establish localized assessment methods that waste management agencies, environmental engineers, and environmental policy decision makers can use to quantify and compare the contribution to the impacts from different waste treatment options.     

Decolorization and estrogenic activity of colored livestock wastewater after electrolysis treatment

Livestock wastewater is treated by activated sludge treatment. Untreated livestock wastewater has high estrogen activity because animal excreta contains estrogen. When activated sludge treatment is applied, the estrogen activity declines or is lost. However, the color of treated livestock wastewater is deep brownish-red because of the decomposition of organic compounds or the synthesis of metabolites. Discharging colored wastewater to the environment could cause some problems, so it is necessary to decolorize colored wastewater before it is discharged. It has been suggested that electrolysis decolorization technology is suitable for treating colored wastewater; however, the process produces volatile organic compounds (VOCs). In fact, little research has been conducted with reference to estrogen activity in wastewater that has undergone electrolysis, especially on the contribution of the electrolysis decolorization process to estrogen activity, i.e., the possibility of resynthesis of some substance with estrogen activity due to resolved and metabolized colored components. In this study, the concentration of VOC was measured for various electrolysis conditions, and estrogen activity was examined using a yeast two-hybrid assay. From the results, decolorization of colored livestock wastewater by electrolysis was possible, and the VOC generation during electrolysis could be controlled depending on the electrolysis conditions. Estrogen activity in colored livestock wastewater disappeared on electrolysis decolorization.     

Selection of product categories for a national eco-labelling scheme in developing countries: a case study of Vietnamese manufacturing sub-sectors

Although the selection of product categories is a deciding factor for the success of eco-labelling schemes, there are no consistent methods for determining selection factors and how to prioritise product categories for developing countries (DgCs). This paper attempts to identify appropriate factors for product category selection and formulate a prioritisation method applicable to DgCs. We first examined the selection factors currently utilised in schemes worldwide by conducting a questionnaire survey of representatives of foreign schemes. Selection factors were illustrated on a plot graph, which indicated the percentage of factors implemented in the schemes of DgCs and developed countries (DGs), and their plausibility assessed when utilised in the schemes of DgCs. In this way, we proposed three groups of factors: an exclusion factor, five core factors and seven operational factors. Then, under the conditions of DgCs, such as socioeconomic issues and availability of data, we used and modified some judging guidelines of the European Ecolabel (the EU Flower), e.g. determining the environmental impacts and potential of environmental improvements, in the scoring method to prioritise product categories by weighting factors. In light of our findings, we utilised the proposed factors and modified the scoring method to prioritise the screened primary list of product categories of Vietnamese manufacturing sub-sectors. By scoring factor-based questions and prioritising in three ways, i.e. following the scoring method of the EU Flower programme, totalling all values with equal weighting, and totalling all values but by doubling the weighting of core factors compared with operational factors, we observed that the weighted prioritisation differentiates priority product categories more clearly than the other methods. We propose the two highest potential candidates for eco-labelling in Vietnam, namely textile/garment and fishery products.     

Individual variations in fatty acid composition and concentration as indicators of the nutritional condition of wild pointhead flounder larvae

We investigated the fatty acid compositions and concentrations of wild marine fish larvae with a highly accurate method because our knowledge of them has been seriously limited compared with cultured larvae. This study presents estimates of the fatty-acid-based nutritional condition of individual larvae in the field. Because the pointhead flounder Cleisthenes pinetorum displays relatively high stock size fluctuations, we investigated the developmental change in the fatty acid compositions of the body trunk, head, and eye and the annual fluctuations in the fatty acid concentrations in the trunk. We show that the process of fatty acid accumulation is not uniform across body parts and that the trunk is a better indicator of larval nutritional status than other parts because there is less time lag. Starved larvae with simultaneously high docosahexaenomic acid ratios and low total fatty acid concentrations, as observed in laboratory experiments, are rare in the wild. Thus, starved larvae must be removed rapidly by predators before they can experience a relatively long period of starvation in the wild. Fatty acid accumulation was greater in the larvae of the 2005 year class than in those of the 2006 year class in their first feeding stage, according to the optimal model derived with generalized linear model. A previous study indicated that the 2005 year class showed stronger recruitment than the 2006 year class. We conclude that the fatty acid analysis of wild larvae is a useful index of their nutritional status and mortality, especially in the first feeding stage.